For a range of our products, you should measure from the outside. When measuring for Tilt and Turn products, you should measure from the inside.
The frame dimensions are the measurements you need to enter into the fields under ‘Frame Dimensions’ to begin your order. To get them, you need to measure the hole dimensions from brick to brick and then subtract 2.5 cm from the width and height. The 2.5 cm leaves a gap all the way around of approx. 1.25 cm for insulation and sealing.
💡 You can see an example with calculations in the video above.
❗ If the window or door you are measuring is mounted in the wall, you may need to remove the cladding from the window to measure the full width and height.
Start by measuring the width first and then continue with the height. Regardless of whether you are measuring for windows or doors. Measure the width and height from brick to brick. Remember to measure in several places, as the opening may be slightly skewed. If the results differ, use the smallest measurement.
When measuring windows, you should pay attention to the interior conditions. Whether it is raw brick or a plastered wall over the frame, you may need to order the windows with a frame groove so that you can subsequently make a nice finish around your new windows.
If you are measuring for doors, you should pay particular attention to the interior conditions if it is an inward-opening door. It makes a difference whether you order a new door with a mahogany or aluminium threshold.
For example, if you are replacing a 30-year-old door with a new door with an aluminium base, the door leaf itself could easily hit the floor inside.
You can choose to select an 18 mm timber cill packer in the designer so you can fit your aluminium cill pressing onto that. You can also choose not to have the cill packer fitted. If you choose so, the 18 mm is included in the total height of your product.
Learn more about cills for Scandinavian windows and which other options you have.
Here are some more details for each type of glass:
Clear glass
The most commonly used glass for most purposes. The perfect glass for the perfect view. All our glass is of course super low-energy and comes standard with a warm edge. It is good both for the indoor environment and your wallet.
Hardened glass
Our safety glass is 4 times stronger than regular glass of the same thickness. In the unfortunate event that the glass breaks, it will break into small granules, with blunt edges, reducing the risk of personal injury.
Sun protective glass
Sun protective and energy-saving glass blocks 63% of the sun's heat. This provides a comfortable indoor climate all year round and reduces the cost of cooling the room in summer and heating it in winter. 10-12% less light will come through with sun-protective glass compared to clear glass, but you still get 70% light penetration for Basic Low Energy (double-glazing) and 64% for Premium Energy+ (triple-glazing).
Please note that just like with sunglasses, sun-protective glass looks darker than clear glass, and it is coloured slightly green, blue or grey to protect from the sunrays. Some variations in the colour can occur between elements.
Acoustic glass
Acoustic glass is the perfect choice for areas with high noise levels. The acoustic glass helps create a quiet indoor environment, providing greater comfort and well-being, improved sleep quality and lowered stress levels.
Ornament
Ornament is the most used raw glass and is characterized by its crude and rough surface.
Kura
Kura is also an ornamental raw glass and is characterized by its vertical lines and rough surface.
Satinovo
Satinovo is the more modern type of raw glass, with a more soft and silky surface. This elegant expression fits perfectly with newer buildings.
Our triple glazing consists of three panes of glass and two cavities with "warm edge" spacer bars. The thickness of the glass varies between 4-6 mm and the cavities are each 18 mm. Overall this translates into a thickness of 48 mm for clear glass and a low U-value of 0.7, which implies good insulation and large potential savings on your heating bill.
The sandwich composition of triple glazing provides better insulation due to the overall thickness of the glass and cavities. All our items have warm edge spacer bars to minimise condensation on the inside of the window panes.
Our double glazing consists of two glass panes and a cavity with a "warm edge" spacer between the panes. Glass thickness is 4-6 mm depending on the type of glass chosen, and the cavity is 20 mm. Overall this translates to a thickness of 26-32 mm and a low U-value of 1.1, which implies good insulation and potential savings on your heating bill.
Double-glazing glass provides slightly more light and allows higher solar gain than triple-glazing. However, if great thermal insulation is a more important factor, then we highly recommend triple-glazing. All our items have warm edge spacer bars to minimise condensation on the inside of the window panes.
Would you like to see our different handles and latches in more detail? You’ve come to the right place!
Depending on the choices you’ve made so far in the designer, you will have a choice of the following handles:
Chrome handle
Chrome handle with lock
White handle
White handle with lock
Or the following latches:
Chrome with storm hook
Chrome with child safety lock and storm hook
Note! Our chrome handles vary slightly in colour. If you plan to place several windows and/or doors together, we recommend choosing the same handle for these.
Please note: Cylinder locks include 3 keys.
If you order 1-5 doors of the same cylinder type (for example, the key/thumb turn cylinder type), you will receive one set of keys that works with all of your doors purchased.
Do you order more than 5 doors, then you will get a set of keys for each set of 5 doors.
However, if you order doors with different cylinder types, the different types of cylinders will each have their own set of keys.
Wood + Aluminum
The best of both worlds. The inner part of the element is made of slow-growing pinewood. In contrast, the outer part comprises powder-coated aluminum cladding, making it extremely weather-resistant and virtually maintenance-free. The all clad window is an elegant and long-lasting solution - less maintenance, less cost and less work.
Wood
All our items are produced from FSC-certified, slow-growing pine. Certified slow-growing pine has annual rings with a maximum of 4 mm and with a high proportion of heartwood. We only use wood from the best manufacturers and select each part very carefully, using a special, high-tech four-sided wood scanner. And of course, it is jointed. In short - only the best of the best.
Painted windows and doors
All our items are industrially painted in our own factory by a high-tech painting robot to ensure consistent quality. No external suppliers or unknown intermediaries. This gives us control over every single little detail so that we can ensure you the best of the best. We naturally use only the best paints and waterproofing.
At Klar, you are free to decide how you want your doors to open. There are a number of advantages and disadvantages to each choice. Therefore, it is a matter of the nature of the interior and exterior space as well as personal preference. Read on to be better equipped to decide what you should choose.
In the video above, you can get an idea of what each opening direction looks like, seen from the inside.
The hinge side is traditionally named according to the space the door opens towards. Therefore, an outward-opening door should be viewed from the outside and an inward-opening door from the inside when deciding whether it should be left- or right-hinged. If in doubt, a good rule of thumb is that you should be able to see the hinge sticking out when the door is closed. If you can, you are on the right side to determine which side the door is hinged on. The same procedure applies to double doors. Here, the door that you open first indicates the direction of opening. For example, in the case of a left-hinged outward opening door, the left door opens first when viewed from the outside.
The advantage of choosing an outward opening door is that it does not take up space in the home when opened. This can be convenient in the case of an entrance door to a narrow hallway where you want to preserve the limited space. This way, you avoid having to ask other people inside to step out of your way if they are putting on their coats when you need to open the door. Outside, there is often plenty of space to open the door, unless the house has a staircase entrance. Outward-opening doors, due to the construction of the frame, are also superior at wicking away rain. In addition, an outward-opening door also better protects the floor inside, as on a rainy day it does not draw water across the floor when it is opened. If the door is exposed to wind and weather, an outward-opening door is therefore a good choice.
If, on the other hand, you choose an inward-opening entrance door, the advantage is that you don't have to ask your guests outside to step back when you open the door for them. You also don't have to reach outside to open the door fully, nor do you have to go out and "fetch the door" after guests have stepped inside. With a balcony door, however, you probably do not have this problem, as it is most often used by the house's own residents.
As mentioned in the introduction, the choice ultimately depends on the specific situation. We recommend that you consider whether you are happy with the way your old door opens.
Note on doors with sidelights When buying a facade door section, the side section is a minimum of 32 cm wide. In addition, the side panel is always placed on the opposite side of the door's hinges.
The packer's height (18mm) is included in the total measurements for your product. The illustration above shows a window, however, this is true for both windows and doors.
The total product height with a packer will then be what you chose for your product
The cill packer is a wooden extension that is attached to the cill of the frame and is used to allow the fitting of an external window cill.
Learn more about cills for Scandinavian windows.
If you are planning to use a stone cill or a hardwood cill you can omit the cill packer
Product height without the cill packer is measured from the bottom of the frame to the top of the frame.
Product number: PLATE6
Materials: FSC-certified Estonian pinewood (heartwood).
Timber quality: Max. distance between growth rings – 4 mm; Min. weight - 480 kg/1m3.
Sash: 77 x 101 mm.
Frame: 44 x 115 mm.
Hinges: Grey, with adjustment.
Handles, Locks, Vents, wind brakes: Manufactured in Denmark and Sweden by manufacturers like IPA and ASSA ABLOY (RUKO).
Please NOTE: Door furniture ie. handle will be supplied loose, to prevent damage in transport to the hardware and product.
Pre-drilled fixing holes: No - this ensures flexibility when it comes to product installation.
Lockbox: 3-point lockbox (without handle and locking cylinder - chosen as accessories).
Panel: Bevelled on both sides, with dark sealing strips (HDF - Hard Density Fiberboard).
Keep: Adjustable keeps for safety locks.
Aluminium glazing beads externally: Additional protection that extends the durability and eliminates nail holes with a nice smooth finish.
Glass: Ug value 0.53 W/m2K. Black spacer profile for all glass.
Door: Ud value 0.9 W/m2K
Wood treatment: Akzonobel Winflex P437.
Paint: Akzonobel ZW Rubbol WF 3310-03-25 - Child friendly, without harmful chemicals.
Paint technology: Finiture Saonara Robot (The quality work of our painting robot is without comparison - and is one of the reasons to choose Klar).
Manufactured to your bespoke order: The measurements are determined by your project and our highly technological factory takes care of the rest. No middle man - just low prices and good quality windows.
CE marking: Yes - your guarantee of European quality.
Warranty: 7 years.
NOTE: For front doors with sidelights, the minimum width of the sidelight is 32 cm. Please take this into consideration when calculating the door opening.
Technical drawings
Technical drawings for panel doors
Door dimensions for handles and cylinders
Your new windows and doors should be made uniquely for your home. Here's four good reasons why you should choose Klar for that job: